SHANGHAI EVER MINING EQUIPMENT CO., LTD

Language

+86-21-57170235

HX Sandmaker

Description : HX series Barmac VSI crusher is used for crushing basalt,pebble,andesite,granite etc into manufactured sand by dry method.This series Barmac VSI crusher consists of body,feeding tube,impacting plate,vertical shaft with rotor and motor.The impacting plate is made from special high-Cr cast with high wearing property,fastening without bolts,easier replacing.Equipped with air circling unit reducing dust discharging.The rotor fitted with wearing pad to prolong service life,to reduce quantity of damageable parts and to reduce running cost.The high speed rotor is balanced to realize lower noise and lower vibration...

+86-21-33781259
+86-21-58975926

Introductions of HX Sandmaker

 

Introduction of HX series Barmac VSI crusher/sadmaker

HX series Barmac VSI crusher is used for crushing basalt,pebble,andesite,granite etc into manufactured sand by dry method.This series Barmac VSI crusher consists of body,feeding tube,impacting plate,vertical shaft with rotor and motor.The impacting plate is made from special high-Cr cast with high wearing property,fastening without bolts,easier replacing.Equipped with air circling unit reducing dust discharging.The rotor fitted with wearing pad to prolong service life,to reduce quantity of damageable parts and to reduce running cost.The high speed rotor is balanced to realize lower noise and lower vibration.

Working Principle of HX series Barmac VSI crusher/sadmaker

The material to be crushed is fed into machine from the feed opening of top,and fall down onto the central section of rotor rotating with high speed.Then it is thrown out with high speed by the strong centrifugal force of rotor,colliding with the impacting plate and crushed.The installed impacting plate shall be colliding with material to be crushed in right angle giving full play of excellent crushing performance.The manufactured sand with proper size is discharging out below the machine.

Features and Advantages of HX series Barmac VSI crusher/sadmaker

 1.Excellent crushing performance

 2.Low running cost: Less damageable parts.Long service life of damageable parts(made from special high-Cr cast iron or hard alloy).Impacting plate may be adjusted and up side-down remounted,so the productivity higher.Easily replacing of damageable parts.

 3.Environment friendly: Lower noise and lower vibration.Less dust discharging out.

Main Technical Data of HX Sandmaker

 

Model

Max Feeding
(mm)

DIA of rotor(mm)

Rotory
Speed (m/s)

Motor Power (Kw)

Cpacity
TPH

Weight
(Kgs)

Overall
mm*mm*mm



HX-1000


30


1040

60

132×2

180

17800

5170X2880X3150

160×2

210

70

110×2

130

132×2

170




HX-1200



35



1235

60

132×2

230

18500

5170X2880X3150

160×2

260

185×2

280

70

132×2

200

160×2

240

185×2

260



Note:the value shown on above table is based on bulk density of 1.6t/m3 and taking andesite as example, the actual production may depend on actual material, moisture etc. In view of output and service life of damageable parts, it is better to feed material less that15 mm( width size).

Catologue of HX Sandmaker

 

Thank you for your interest in our HX Sandmaker . We have specially attached PDF, word catalog etc, information as much as possible. Welcome to download.

Click to download PDF catalog.        Click to download word catalog.

Leave Your Message

Name *
Email *
Phone
Content *