SHANGHAI EVER MINING EQUIPMENT CO., LTD

Language

+86-21-57170235

HB Sandmaker

Description : HB Series Sand Shaping Machine is developed by our company. It is suit for crushing all kinds of rock material which compression strength less than 300 MPa into cubes. According to different needs, the rotor speed and the electrical power can be arbitrar chosen. Some parts of SCBL series can be remodeled into SX series easily.

+86-21-33781259
+86-21-58975926

Introductions of HB Sandmaker

 

Introduction of HB series Barmac VSI crusher/sadmaker 


HB Series Sand Shaping Machine is developed by our company. It is suit for crushing all kinds of rock material which compression strength less than 300 MPa into cubes. According to different needs, the rotor speed and the electrical power can be arbitrar chosen. Some parts of SCBL series can be remodeled into SX series easily.


Structure & Working Principle of HB series Barmac VSI crusher/sadmaker

HB Series Sand Shaping Machine is composed of feeding pipe, shaft, rotor and motor. Air-cycle unit is assembled on two sides of feeding port, which can prevent dust from discharging outside. The rotor going round and round at a high speed produce less noise and vibration. Because we select special material, life of the rotor is prolonged.

The material to be crushed is fed into machine from the feed opening of top,and fall down onto the central section of rotor rotating with high speed.Then it is thrown out with high speed by the strong centrifugal force of rotor,colliding with the impacting plate and crushed.The installed impacting plate shall be colliding with material to be crushed in right angle giving full play of excellent crushing performance.The manufactured sand with proper size is discharging out below the machine.


Features and Advantages of HB series Barmac VSI crusher/sadmaker

 1.Excellent crushing performance

 2.Low running cost: Less damageable parts.Long service life of damageable parts(made from special high-Cr cast iron or hard alloy).Impacting plate may be adjusted and up side-down remounted,so the productivity higher.Easily replacing of damageable parts.

 3.Environment friendly: Lower noise and lower vibration.Less dust discharging out.


Main Technical Data of HB Sandmaker

 

Model

Max Feed Size(mm)

Speed (m/s)

Capacity

(t/h)

Power

(kw)

Weight

(kg)

Overall Dimensions (mm)

HB-1000

40

45

133-174

110×2

17500

5710×2880×3150

40

50

181-220

132×2

17500

5710×2880×3150

HB-1200

40

45

185-240

132×2

18300

5710×2880×3150

40

50

220-260

160×2

18300

5710×2880×3150

40

50

255-300

185×2

18300

5710×2880×3150

Note:

1. Above data is get under the condition that compression strength is 150-160 MPa and pile density is 1.6t/m³, and water content does not exceed 1.5%.

2. Feeding is continuous and even.

3. In view of output and service life of damageable parts, it is better to feed material less than40 mm.

Catologue of HB Sandmaker

 

Thank you for your interest in our HB Sandmaker . We have specially attached PDF, word catalog etc, information as much as possible. Welcome to download.

Click to download PDF catalog.        Click to download word catalog.

Leave Your Message

Name *
Email *
Phone
Content *