SHANGHAI EVER MINING EQUIPMENT CO., LTD

Language

+86-21-57170235

GYM Grinder Mill

Description : High pressure grinder mill is used to grind barite, limestione, ceramics, etc, such non-inflammable and non-explosive stuff,which the hardness is below 9.3 Mohs and moisture is less than 6% in mining,and construction material.

+86-21-33781259
+86-21-58975926

Introductions of GYM Grinder Mill

 

High Pressure Grinder Introduction:

 (High Pressure Suspension Mill), is used to grind barite, limestone, kaolin, and ceramics and slag, whose Moh's hardness is below 9.3 scales, non-inflammable and non-explosive material.

Working Principle of High Pressure Grinder:

The grinding Process of the Main Mill is that the transmission device brings along the Central Shaft to drive. The upper part of the shaft connects with the Quincunx Rack, on the frame is loaded with the roller assembly, and forms a swinging pivot. The central shaft does revolve around the central rotation, at the same time it revolves around the grinding rings, and itself also rotates on account of the grinding effect. The shovel system, in the lower part of rollers, is loaded on the lower part of the Quincunx Rack. In the process of rotating of the shovel and the roller, the material will be fed gasket layer between the rollers and ring. The outside centrifugal force (compression force) yielding in this process will process the material into small powder, thus the desired powder is obtained.

High Pressure Grinder Application:

High pressure suspension grinder mill is used to grind barite, limestione, ceramics, etc, such non-inflammable and non-explosive stuff,which the hardness is below 9.3 Mohs and moisture is less than 6% in the trades of mining,metallurgy,chemical engineering and construction material.The fineness size is adjusttable in the range of 60-1250 mesh(It can even reach to 2500 mesh).It is possible to produce 10-60 mesh powder through assembling special device in the machine.

 High Pressure Grinder Futures & Advantage:

1)Compared with other pulverizer under the same power conditions, the output of this machine is increased by 20-30%.

2) All the mineral materials with Mohs hardness below 9.3 can be crushed.

3) The finished powder has a wide range of particle size from the maximum particle diameter of 0.613mm (30 mesh) to the finest diameter of 0.013mm (1000 mesh), while the normal particle diameter is around 0.033mm (425 mesh)

4) Its dust-removing effect exactly meets the National Dust Discharge Standard.

5) The classfier is easy for adjustment.

6) The grinding unit adopts a superposition multi-grade sealing with good sealing performance.


 

Main Technical Data of GYM Grinder Mill

 

Model

GYM7815

GYM8514

GYM9518

GM4121

GYM4528

GYM5128

Roller

QTY

3

3

4

5

6

6

Dia(mm)

260

270

310

410

450

510

Height(mm)

150

140

180

210

280

280

Ring

Inner Dia(mm)

780

850

950

1280

1600

2000

Height(mm)

150

140

180

210

280

280

Max Feeding(mm)

15

20

25

25

35

35

Final Size(mm)

0.613-0.033

0.613-0.033

0.613-0.033

0.613-0.033

0.613-0.033

1.6-0.045
(Micro upto 0.038)

Motor Power(Kw)

18.5

22

37

75

132

200

Note: Specifications may change without further notice.

Catologue of GYM Grinder Mill

 

Thank you for your interest in our GYM Grinder Mill . We have specially attached PDF, word catalog etc, information as much as possible. Welcome to download.

Click to download PDF catalog.        Click to download word catalog.

Leave Your Message

Name *
Email *
Phone
Content *